some wyrde workflows for comfyUI

wyrde 50dca13f45 working on custom nodes tutorial		2 years ago
..
pix	image upload	2 years ago
README.md	working on custom nodes tutorial	2 years ago
basic-wf-vae-lora-latemt-upscale-hrf.json	expanding hrf	2 years ago
basic-wf-vae-lora-latemt-upscale-x2.json	expanding hrf	2 years ago
basic-workflow-v03.json	first workflows	2 years ago
basic-workflow-vae-lora-latent-hrf.json	first workflows	2 years ago
basic-workflow-vae-lora-latentupscale-v03.json	first workflows	2 years ago
basic-workflow-vae-lora-one-latent-v03.json	first workflows	2 years ago
basic-workflow-vae-lora.json	lora workflow	2 years ago
basic-workflow-vae-v03.json	first workflows	2 years ago

README.md

Building on the Basics

A series of workflows to teach some of ComfyUI's basics.

The Beginning

basic-workflow .json file

Once ComfyUI is installed and running, adding workflows is as easy as dragging and dropping images or workflows created by ComfyUI into the empty area of the browser window.

To follow along with this tutorial, download the workflow and save it. Then use the [ Load ] button in ComfyUI to load it.

This basic workflow generates an image based on the positive and negative prompts.

processing starts with the "checkpoint", which is loaded by the Load Checkpoint node on the left.
Information from the chekcpoint is sent to the two clip boxes, along the node path, and along the model path.
The clip text encode node attached to the KSampler's positive input in the Positive Prompt.
The clip text encode node attached to the KSampler's negative input in the Negative Prompt.
The Empty Latent Image is the "starting image", and is a blank bit of noise. Rather like a painter's canvas.
The Model is all the raw information Stable Diffusion uses through the KSampler to resolve noise into images.
I don't know what VAEs are, but they're important.
- all models contain a VAE, but not all models have a good VAE.
- an external VAE can be added to the workflow through a VAE laoder (see below).
The KSampler node has a number of options. I won't go over all of them here, but for right now the most important are:
- The Seed is a number used for randomness. All things being equal, a workflow with the same seed will spit out the same image.
- If the seed doesn't change and nothing else changes, ComfyUI won't even process the workflow. The result is the same as last time. If nothing else changes and the seed does, then new images will be generated. They can vary wildly from one to the next.
- This makes it easy to tell if nothing has changed.
- The line under the seed is how new seeds are generated.
  - fixed: they aren't. Seed stays the same. Useful for checking othetr parameters and generating the same basic image.
  - Increment/Decriment: the seed changes by +/- 1.
  - Random: Holdy Changing Numbers, Batman!
- values are changed by clicking the arrows to scroll through the options or clicking directly on a value to see a list.

Before an image can be generated, a model is needed. Go ahead and select v1-5-pruned-emaonly.safetensors

What, don't have it? Well, get it from here.
Don't click the file name, it leads to a web page. Click on the right to download the file.
Place the file in ComfyUI\models\checkpoints\

Click "Queue Prompt" in the box on the side of the window to generate an image. If the same settings are used from the workflow above, it'll look remarkably like

if it doesn't then, umm, oops?
if there are errors on the screen, then the model is likely not selected
- or a noodle is disconnected
if there are errors in the console window, then other things are wrong.

Adding a Vae Loader

workflow + vae.json file

There are three primary ways to add nodes

noodle dragging
- left click and drag from a node's output dot. A noodle appears.
- Drag the noodle to a nice spot and let go.
- A slection box with nodes of the same type will appear.
Double Click
- Double Left Click on an empty spot and a list will appear.
- scroll through the list or start typing to filter it.
- select the desired node
Right Click Menu
- right click on an empty place on the canvas
- a context menu appears
- left click on add node for the nodes submenu
- Left click on the submenu for the node desired for a list of nodes or more menus

For a VAE Loader

Right click. Add node → loaders → Load VAE
double left click, type VAEL and select it
a noodle can be pulled from the VAE Decode node's input and dropped to show a Vae Loader in the menu, but that'll be messy. Let's save messy workflows for crazy vixens like comfy and mike.
Go ahead and place a vae

Download a VAE from stabilityai and drop it in ComfyUI\models\vae. Get the pruned.safetensors file.

Don't click the filename (it results in a page that is confusing until eyes finally spot the "download" link), click to the right. .
Drop the file in ComfyUI\models\vae\
Once it is downloaded, hit F5 and refresh the window so Comfy knows the file is there.
With one vae, it is easy to pick in the VAE Loader by clicking on arrows or the list.

In this particular case, there isn't a huge difference in making a new version with the vae linked. For an idea of what differences vae make, check out this comparison. The ones with bad vae are faded and washed out. Good vae are vibrant.

Note

Automatic1111's method of matching vae file names to models and placing them in the model folder doesn't matter to ComfyUI. Either the VAE is loaded directly or the one built into the model is used.
Here's some good info on VAE

Adding a Lora

workflow + vae + lora.json file

Lora (and the varients) are cool mini-models that are used to alter a bigger model. Think of them like the trojan horse, but everyone is happy with the result. Usually.

here's a lora to test with. Drop it in the ComfyUI\models\lora\ folder.

as with other files, hit F5 to refresh the file lists
ignore the text in the lora page for now, what is first seen is for version 3.0 and version 1 is what we're using.

Adding a lora is a bit more tricky than a vae loader, because they go between the model and the Ksampler.

Unlike automatic1111, the lora aren't put in the prompt.

Make a little room for the lora Loader node.

Between the CLIP Text nods and Load Checkpoint hold down the control key and drag with the left mouse button. It will draw a box. When Left Mouse is released, everything inside the box is selected.
Now hold down shift and Left Click one of the selected nodes. All the nodes will be dragged as a group when the mouse is dragged.
It is better to make room by dragging nodes right than left
Refreshing (F5) the window zooms to the barely visiable blue box where the beginning nodes are.
it gets annoying to pan left all the time

Now drop a Lora Loader in the empty spot.

Connect the Load Checkpoint model and clip outputs to the Load Lora.
- The Load LoRA's model output goes to the model reroute (to the KSampler model input)
  - this will autmatically detach it from the Load Checkpoint.
- The Load LoRA's CLIP output is noodled to both the CLIP nodes' inputs.
  - this will autmatically detach them from the Load Checkpoint.
Select mPixel_v10pixelArt.safetensors for the lora_name field.
change strength_model and strength_clip to 0.8

When Queue Prompt is clicked, the image should now be a pixel-art bottle.

HiRez Fixing

So, an important thing about stable diffusion is the models are trained on small images. 512x512 pixels is the standard size for most SD1.5 based models (768 for a few). SD2.x models can be either 512px or 768px, depending on the one chosen.

But what does that mean for regular users? Most people want a much larger image (1920x1080 for example). The thing is, just changing the Latent Image size to 1920x1080 tends to go horribly, horribly wrong. That's because stable diffusion doesn't really understand "size" or "composition". When it sees a huge canvase size, it tries to fill every part of it with the prompt.

the previous prompt and configuration with a 1920x1080 size latent:

But fear not, there are a few techniques to increase image size from 512px to something more grandiose.

Latent Upscale: this takes a latent image and makes it bigger. The result is okay, but the larger image is missing much of the detail that is possible.
Pixel space upscale: Tends to look beter than latent upscale, but is still missing details.
Pixel space upscale with model: There are special models designed for a better upscale result. Some even extrapolate details.
High Resolution Fixing: Uusually abbreviated to HR-Fix or even furthetr to HRF, this method is a combination of many of the above. It uses many steps, takes longer, but results in high-detail images. There's the added bonuse that stable diffusion can even "fix" broken parts of the image! Sometimes.

What is this latent space vs pixel space thing?

Latent space is the zone of chaos and randomness stable diffusion works in. These aren't really images like human eyes see, but math-magic representations the computer works with.
pixel space is an actual image, rendered in pixels. The things human eyes and graphic arts programs like to work with.
VAE Decoding and Encoding is used to translate a latent image to pixel and back.
Some proccesses can only be done in latent space (like KSampling) and others only in pixel space (color correction, model upscaling)

There are some caveats to HR-fixing.

work in as many small steps as you can stand.
stick to multiples of 64px. This can be challenging with images of different aspect ratios. There are some custom nodes that help with this.
if the aspect ratio makes multiples of 64px challenging, do the image upscales in pixel space
- due to the math involved, even then it is best to do multiples of 8 pixels.
it is better (and faster) to go through many low-resolution latent space samples and then do a large pixel upscale. This gives lots of detail for the pixel upscale to work with.

But first, let's make a basic HR-Fix.

at the right side of the workflow, move the VAE Decode and Save Image nodes to the right (try and grab the VAE reroute on the bottom too).
- about as far as the distance they currently occupy, maybe a touch more.
put a Upscale Latent node next to the Ksampler
connect the LATENT output on the Ksampler to the Samples input on the Upscale Latent node.
put a KSampler node between the Upscale Latent and the VAE Decode.
connect he LATENT output from the Upscale Latent node to the latent_image input on the new KSampler node.
connect the LATEN output on the ksampler to the samples input on the VAE Decode node.
- this will also erase the noodle from the old ksampler to the vae decode
On the Upscale Latent node, increase wideth and hight by 64pixels. This is easy by clicking the arrows on the right, next to the numbers.

But wait! We're not done. The new KSampler still has a bunch of inputs that are empty. That's because the sampler needs to know what to do with the latent image.

See the model rerout hanging out at the corner of the positive prompt?

lect click to activate it.
Ctrl-C to clone it.
move mouse a little to the right (above the older ksmampler is fine)
ctrl-V to paste the cloned reroute
now connect them
then drag it right so it is close to the new KSampler
and connect it to the model input on the new KSampler
The reroute is still in the clipboard, so do another ctrl-v below that initial mode reroute.
This time, connect the CONDITIONING output from the Positive prompt to the new reroute. The name will change, but not the color.
Right Click on the reroute node, left click on Colors, then select Yellow
repeat the last few steps to make a second reroute for the negative node and change color to black.
now tidy them up a bit.
hint: shift-lelft mouse when dragging "snaps" the node to the grid. Makes them easier to place evenly.
Shift-Left Click on both the new conditioning nodes to select both of them.
Contrl-C to clone them to clip board
Ctrl V a little to the right to paste them on the workflow.
Run noodles from the previous conditioning nodes to the new ones.
and drag them to the right. They should still be selected, so shift+left mouse will move both of them.
then connect them to the inputs for positive and negative.
The upscale and ksampler should be ready. If you changed the Empty Latent Image node to test out larger sizes, change it back to 512px.
Click on Queue Prmpt
Marvel at the slightly larger and more detailed pixel bottle!

But wait! Isn't this bottle somewhat different from before? It sure is! And here is why:

On the new KSampler, denoise is set to 1.000
This tells the ksampler to treat the latent image input as if it were a new canvas and to extrapolate the result like a new image.
adjust the denoise down to more closely match the original latent while still adding detail.
0.500 is generally a good number for the first "HR Fix"
click Queue Prompt again.
Instead of running the whole workflow, comfyui should start at the second KSampler. This is because the there were no changes earlier in the workflow.
if the first ksamnpler runs again, this means
- the seed changed
- comfy has been restarted since the last time
- I don't know what I'm talking about.

So, umm. err...

Why do all the reroutes and color coding? Can't we connect directly from the model and conditioning outputs to the new ksampler?

Sure can! And while it is easy to tell what's going on now...
imagine a workflow with a hundred nodes
now imagine coming back to the workflow a month later or...
looking at another person's workflow.
running reroutes, color coding, and keeping things tidy helps considerably!
besides, using stable diffusion is about making pretty pictures. Let's make pretty workflows, too!

Expanding on Fixing

More Latent Fixing

Adding more nodes and increasing the HR-Fix is easy.

Drag the ouput nodes to the right so there's more space.
Select the reroute, latent, and ksampler nodes on the end.
Ctrl-C to clone
Move the mouse over and ctrl-V to paste
a litle shift-drag magic to line things up
Drag noodles to link
and increment the Upscale Latent width and height values
and decrease denoise a little. For this one, .450 is good.
each ksampler in a HRF will decrease the noise
though for latent space, about .2 is the lowest. Usually.

here's the current workflow

More latent HRFs will gradually increase the output image while adding details. But let's stop here and add some pixel space HRFs. Onewards, noble steed!

Pixel Space HR Fixing

First, we need to translate from latent space to pixel space.

Select the VAE Decode and its VAE reroute below and clone them over by the last ksampler.
drag the output nodes to the right again
Now add a Upscale Image node
After the upscale node, we need a VAE Encode node.
Select the reroute nodes and ksampler and clone them into the space after the new encode node
Connect all the noodles
During this process, the connection to the first VAE reroute all the way on the left will likely be lost. Don't worry! Pan over to the left by holding down space while moving the mouse.
- space + mouse = pan.
- release space to move mouse back
- space + mouse to pan again
start dragging the noodle from the leftmost vae reroute
- space and mouse to keep going
and attach it to the newer VAE reroute.
the workflow should now look something like this:
adjust the Upscale Image height and width to 704
unlike latent space HR Fixes, after a pixel upscale the denoise doesn't need decreased as much. In this case, leaving it at .5 is okay.
- generally speaking, sampling after pixel space upscales doesn't need decreased below 0.400. Generally. There's always exceptions. That's the norm with Stable Diffusion.
output:

Upscaling

Improving images with HiRez Fixes is one thing, but what about simply making it bigger? That's where upscaling comes in. As mentioned before, jumping from 512px to 1080p and higher isn't advised due to the lack of detail. Each HR Fix also gives stable diffues the chance to correct mistakes. (It doesn't always, though. Stable Diffusion is a contrary baast.)

Once an image has some detail, one of the best ways to upscale it further is with an Upscale Model. There's a whole bunch of them here, but we'll keep it easy with PSNRx2. Follow https://huggingface.co/wyrde/upscales/tree/main/apache2 and click the LFS button to download.

Save the file in ComfyUI\models\upscale_models\

Now let's set up the upscale!

As usual, make some room with a little dragging.
the VAE Decode can be left alone since we're going to use it. Only the Save Image node needs moved this time.
Now add the Load Upscale Model and Upscale Image (Using Model) nodes.
Connect the inputs and outputs
Right now, this will result in a 1408x1408 image. But what if that's too big?
Add an image scale node, but set it's size lower. 1024x1024 is good for today.
hit queue prompt
since the previous parts of the workflow didn't change, it runs the cached image through the scalers.

Embeddings/Textual Inversions

Otherwise known as Textual Inversions, embeddings are a bit different than the usual additions to a comfy workflow. Instead of a node, they are added directly to a prompt. This is due to the nature of an embedding, they are specialized models which provide a specific meaning to a token.

Wait, tokens?

While prompts are human readable, they are not read in a human fashion by stable diffusion. They are translated into tokens, and stable diffusion assigns meaning to them according to associations in the model (including lora, which come before the prompts).

Tokens are placed in an prompt with the keyword embedding: followed by the embedding's filename. For example, a popular negative embedding is EasyNegative.pt.

embedding:EasyNegative

There is no space between embedding: and EasyNegative, it is all one "word." The filename extension (.pt in this case) can be left off if desired.

Embeddings can be placed in positive or negative prompts, as desired. Much like lora, trigger words aren't strictly neceessary, but can add additional "weight" to the prompt.

Custom Nodes

One of the great things about ComfyUI is the ease of adding custom nodes to the workflow. Uusually. Not all custom nodes are equal in installation ease.

The following instructions are for the standalone portable windows build.

First, there's three basic kinds of nodes.

Ones that are python-based. These go into ComfyUI\custom_nodes folder.
Ones that are extensions to the user interface. These go into the ComfyUI\web\extensions folder.
Ones that are mixed and have files that go into each.

There are two basic ways to get the nodes.

In archived format (zips), usually found on civitai.com.
as repositories on github or another repository site.

The first step to using custom nodes is installing git. Even if used only once, it'll save so many headaches later.

https://github.com/git-guides/install-git

The second step is knowing how to open a shell to the custom_nodes folder.

the esiest way is to open file explorer, navigate to your custom_nodes folder, then type CMD into the address bar and hit enter.

Using the ComfyUI-Manager

The easiest way to install a mod is with he comfyui monaager. It is a mod itself, but fairly easy to install.

Not officially part of conmfyui
get it from here: https://github.com/ltdrdata/ComfyUI-Manager
even if the zip version is downloaded, it still needs git to install other custom nodes.

Installing from zips

Most archives are a simple matter of unzipping them into the right folder. If they take more than that, the author generally provides instructions.

If the zip has only files ending in .py, put them directly in custom_nodes
if the zip has a folder/directory, put it (and the files inside it), in custom_nodes
- note, if the folder doesn't contain a file called init.py an error will be shown in the console when comfy starts. While annoying, the error can be ignored.